Is it possible to Archive both locally and externally? Ideally I would like to archive both to my flash drive with a maximum of 5 copies and to a TFTP / SCP / FTP server. However when I added the path tftp:// it replaced my path to flash. I cannot specify a maximum number of archives, which I understand, if I am using TFTP.
Is there anyway to configure multiple Archive paths? I would like an archive locally on flash and on TFTP.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...