Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Multiple Gateways to Internet

I have 2 3650 doing vlans. i have a firewall setup in between the internet and the switches. i have a dmz i am setting up on a seperate vlan that connects to an optional interface on my firewall. is there a way to have all traffic for this particular vlan route internet access to a different gateway than all other vlans?

thanks in advance for any help.

1 REPLY
Bronze

Re: Multiple Gateways to Internet

I would use policy-based routing on the 3560 to accomplish this.

What IOS version are you using?

You will need to configure the SDM template to routing in order to enable PBR.

Setting the SDM template to routing is quite simple. It involves the configuration command:

sdm prefer routing

then a reload

http://www.cisco.com/en/US/products/hw/switches/ps5528/products_configuration_guide_chapter09186a00805b8490.html

PBR can be configured here:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr_c/ipcprt2/1cfindep.htm#wp1001398

Basically you will need to match the source vlan in the route-map and set the next-hop to the the desired gateway. Finally, apply this to the source vlan interface.

Hope this helps.

Michael

Cisco TAC

103
Views
5
Helpful
1
Replies