Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

multiple ip's on one port configured for vlan

I have server folks who are interested

in the following

192.168.12.x addresses are on vlan212

on the 192.168.12.9 server..they

would like to install a vmServer

with an address of 192.168.5.4

would this be possible?

can you have multiple subnets on one vlan port configurd for one particular vlan?

2 REPLIES

Re: multiple ip's on one port configured for vlan

Hi Richard,

You can configure a secondary ip address on the routed vlan interface like this:

interface vlan 212

ip address 192.168.12.1 255.255.255.0

ip address 192.168.5.1 255.255.255.0 secondary

Cheers:

Istvan

New Member

Re: multiple ip's on one port configured for vlan

If this is a Linux server, you can build 802.1q into your kernel, create VLAN interfaces on the server and trunk your two (or more) VLANs to it via a trunk port.

Complicated but works as advertised.

http://www.candelatech.com/~greear/vlan/howto.html

169
Views
0
Helpful
2
Replies
CreatePlease to create content