04-18-2008 08:19 AM - edited 03-05-2019 10:28 PM
I have server folks who are interested
in the following
192.168.12.x addresses are on vlan212
on the 192.168.12.9 server..they
would like to install a vmServer
with an address of 192.168.5.4
would this be possible?
can you have multiple subnets on one vlan port configurd for one particular vlan?
04-18-2008 08:36 AM
Hi Richard,
You can configure a secondary ip address on the routed vlan interface like this:
interface vlan 212
ip address 192.168.12.1 255.255.255.0
ip address 192.168.5.1 255.255.255.0 secondary
Cheers:
Istvan
04-19-2008 01:05 AM
If this is a Linux server, you can build 802.1q into your kernel, create VLAN interfaces on the server and trunk your two (or more) VLANs to it via a trunk port.
Complicated but works as advertised.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide