VRF-lite which is supported on the 4500 switch would allow you to have per vlan routing tables if that is what you want. In effect you have multiple separate routing instances and you assign interfaces to those routing instances.
Please see the following link for more details and feel free to come back with any more questions.
Although the ip next-hop is set to 10.10.10.254 I assume for inter-vlan routing the L3 switch would know to use the directly connected path in order to connect to 18.104.22.168/24? (unless otherwise restricted by an ACL)
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...