Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

My issue is not resolved (2960g unsupported TCAM value size).

By some reason(forum has some technical problems?) I can't post to my original post, so I'll say it here:

My issue is not resolved. I still have:

!!! WARNING: The switch is not usable !!!

Reason:

Error unsupported TCAM value size

Actual value = 1, Expected value = 20

Tried many different images,still the same.

Do I have any hope except by RMA?!?!

2 REPLIES

Re: My issue is not resolved (2960g unsupported TCAM value size)

Open a TAC case. Sounds like hardware failure.

HTH,

John

HTH, John *** Please rate all useful posts ***
New Member

My issue is not resolved (2960g unsupported TCAM value size).

I have come across a similiar issue with a 2960 switch which was loaded with IOS version c2960-lanbasek9-mz.122-25.SEE2.bin. I deleted that IOS and reloaded c2960-lanbasek9-mz.122-35.SE5.bin and that resolved the problem

2489
Views
0
Helpful
2
Replies