Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

N7K and adding VLANs to a trunk

Group  -

Thanks in advance for your assistance.  I should know the answer to my question, but for the life of me I can not remember. 

When you use the command

switchport trunk allowed vlan add [vlan-id]

There should be no drop in service to the existing VLANs, correct?  I am trunking from a 7K to a 2960S via 2G PoCh.

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

N7K and adding VLANs to a trunk

That is correct.  if you use switchport trunk allowed vlan add [vlan-id] than there is no drop in services.

Be careful not to use this

switchport trunk allowed vlan [vlan-id]

This will delete all the vlans on the trunk and only add the vlan you specify here

HTH

2 REPLIES
VIP Super Bronze

N7K and adding VLANs to a trunk

That is correct.  if you use switchport trunk allowed vlan add [vlan-id] than there is no drop in services.

Be careful not to use this

switchport trunk allowed vlan [vlan-id]

This will delete all the vlans on the trunk and only add the vlan you specify here

HTH

New Member

N7K and adding VLANs to a trunk

Thanks!

345
Views
0
Helpful
2
Replies