I have two data centers with 2 N7K per DC. There is a vPC peer link between the two units in the same DC. N7K A at data center A connects to N7K A at data center B & N7K B at data center A connects to N7K B at data center B over a 2 WAN links. Can I load balance over equal cost links with EIGRP or will the vPC peer links be seen as a hop and thus there will not be equal cost links?
I am still in the planning stage and it looks like OTV is not an option.
Re: N7K EIGRP load balancing between to data centers
The vPC peer-link is L2, and it should not consider a L3 hop. For vPC VLANs/devices between both DC, yes, EIGRP can be used to load shared traffic (assuming you are doing L3 between DC since you are running EIGRP). If you have one-arm servers (or active/standby NIC), no, traffic will not be load shared.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.