Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

N7K-M148GT-11 powered-dn after upgrade

Hi, In a Nexus 7000 after upgrading from 4.1(5) to 5.2.3(a), we have a N7K-M148GT-11 module in powered-dn.

I'm not sure if it is a HW problem, or software.

Any help, thanks

NEXUS_Qro_MAN02# sh logging last 15

2013 Oct 18 00:55:49 NEXUS_Qro_MAN02 %PLATFORM-5-MOD_STATUS: Module 8 current-status is MOD_STATUS_POWERED_UP

2013 Oct 18 01:00:42 NEXUS_Qro_MAN02 %PLATFORM-2-PFM_MODULE_RESET: Manual restart of Module 8 from Command Line Interface

2013 Oct 18 01:00:44 NEXUS_Qro_MAN02 %PLATFORM-2-MOD_DETECT: Module 8 detected (Serial number JAF1333AEEP) Module-Type 10/100/1000 M

bps Ethernet Module Model N7K-M148GT-11

2013 Oct 18 01:00:44 NEXUS_Qro_MAN02 %PLATFORM-2-MOD_PWRUP: Module 8 powered up (Serial number JAF1333AEEP)

2013 Oct 18 01:00:44 NEXUS_Qro_MAN02 %PLATFORM-5-MOD_STATUS: Module 8 current-status is MOD_STATUS_POWERED_UP

2013 Oct 18 01:01:40 NEXUS_Qro_MAN02 %MODULE-5-LCM_MODULE_UPGRADE_START: Upgrade of module 8 started

2013 Oct 18 01:01:40 NEXUS_Qro_MAN02 %MODULE-5-LCM_MODULE_UPGRADE_END: Upgrade of module 8 ended

2013 Oct 18 01:05:52 NEXUS_Qro_MAN02 %PLATFORM-2-MOD_DETECT: Module 8 detected (Serial number JAF1333AEEP) Module-Type 10/100/1000 M

bps Ethernet Module Model N7K-M148GT-11

2013 Oct 18 01:05:52 NEXUS_Qro_MAN02 %PLATFORM-2-MOD_PWRUP: Module 8 powered up (Serial number JAF1333AEEP)

2013 Oct 18 01:05:52 NEXUS_Qro_MAN02 %PLATFORM-5-MOD_STATUS: Module 8 current-status is MOD_STATUS_POWERED_UP

2013 Oct 18 01:10:56 NEXUS_Qro_MAN02 %MODULE-2-MOD_FAIL: Initialization of module 8 (serial: JAF1333AEEP) failed

2013 Oct 18 01:10:57 NEXUS_Qro_MAN02 last message repeated 1 time

2013 Oct 18 01:10:57 NEXUS_Qro_MAN02 %PLATFORM-2-MOD_PWRDN: Module 8 powered down (Serial number JAF1333AEEP)

2013 Oct 18 01:10:57 NEXUS_Qro_MAN02 %PLATFORM-5-MOD_STATUS: Module 8 current-status is MOD_STATUS_CONFIGPOWERED_DOWN

2013 Oct 18 01:10:57 NEXUS_Qro_MAN02 %PLATFORM-5-MOD_STATUS: Module 8 current-status is MOD_STATUS_POWERED_DOWN

NEXUS_Qro_MAN02# 

NEXUS_Qro_MAN02#

NEXUS_Qro_MAN02#

NEXUS_Qro_MAN02# ^C

NEXUS_Qro_MAN02# ^C

NEXUS_Qro_MAN02#

NEXUS_Qro_MAN02# show environment power

Power Supply:

Voltage: 50 Volts

Power                              Actual        Total

Supply    Model                    Output     Capacity    Status

                                 (Watts )     (Watts )

-------  -------------------  -----------  -----------  --------------

1        N7K-AC-6.0KW               798 W       6000 W     Ok       

2        N7K-AC-6.0KW               802 W       6000 W     Ok       

3        N7K-AC-6.0KW               777 W       6000 W     Ok       

                                  Actual        Power     

Module    Model                     Draw    Allocated    Status

                                 (Watts )     (Watts )    

-------  -------------------  -----------  -----------  --------------

1        N7K-M148GS-11              278 W        400 W    Powered-Up

2        N7K-M148GS-11              286 W        400 W    Powered-Up

3        N7K-M132XP-12              N/A          750 W    Powered-Up

4        N7K-M132XP-12              N/A          750 W    Powered-Up

5        N7K-SUP1                   N/A          210 W    Powered-Up

6        N7K-SUP1                   N/A          210 W    Powered-Up

7        N7K-M148GT-11              N/A          400 W    Powered-Up

8        N7K-M148GT-11              N/A            0 W    Powered-Dn

Xb1      N7K-C7010-FAB-1            N/A           60 W    Powered-Up

Xb2      N7K-C7010-FAB-1            N/A           60 W    Powered-Up

Xb3      N7K-C7010-FAB-1            N/A           60 W    Powered-Up

Xb4      xbar                       N/A           60 W    Absent

Xb5      xbar                       N/A           60 W    Absent

fan1     N7K-C7010-FAN-S             88 W        720 W    Powered-Up

fan2     N7K-C7010-FAN-S             88 W        720 W    Powered-Up

fan3     N7K-C7010-FAN-F              9 W        120 W    Powered-Up

fan4     N7K-C7010-FAN-F              9 W        120 W    Powered-Up

N/A - Per module power not available

Power Usage Summary:

--------------------

Power Supply redundancy mode (configured)                PS-Redundant

Power Supply redundancy mode (operational)               PS-Redundant

Total Power Capacity (based on configured mode)              12000 W

Total Power of all Inputs (cumulative)                       18000 W

Total Power Output (actual draw)                              2377 W

Total Power Allocated (budget)                                5100 W

Total Power Available for additional modules                  6900 W

NEXUS_Qro_MAN02# sh module

Mod  Ports  Module-Type                         Model              Status

---  -----  ----------------------------------- ------------------ ----------

1    48     1000 Mbps Optical Ethernet Module   N7K-M148GS-11      ok

2    48     1000 Mbps Optical Ethernet Module   N7K-M148GS-11      ok

3    32     10 Gbps Ethernet Module             N7K-M132XP-12      ok

4    32     10 Gbps Ethernet Module             N7K-M132XP-12      ok

5    0      Supervisor module-1X                N7K-SUP1           active *

6    0      Supervisor module-1X                N7K-SUP1           ha-standby

7    48     10/100/1000 Mbps Ethernet Module    N7K-M148GT-11      ok

8    48     10/100/1000 Mbps Ethernet Module    N7K-M148GT-11      powered-dn

Mod  Power-Status  Reason

---  ------------  ---------------------------

8    powered-dn     Reset (powered-down) because module does not boot

Mod  Sw              Hw

---  --------------  ------

1    5.2(3a)         1.2    

2    5.2(3a)         1.2    

3    5.2(3a)         1.6    

4    5.2(3a)         1.6    

5    5.2(3a)         1.5    

6    5.2(3a)         1.5    

7    5.2(3a)         1.5    

Mod  MAC-Address(es)                         Serial-Num

---  --------------------------------------  ----------

1    00-23-eb-3f-ba-74 to 00-23-eb-3f-ba-a8  JAF1329ANFH

2    c4-7d-4f-3b-40-a4 to c4-7d-4f-3b-40-d8  JAF1344ATTR

3    00-23-eb-51-6c-2c to 00-23-eb-51-6c-50  JAF1329ALHJ

4    00-25-84-e4-15-40 to 00-25-84-e4-15-64  JAF1321ARRL

5    00-26-51-bd-57-40 to 00-26-51-bd-57-48  JAF1333AALL

6    00-26-51-bc-e9-c0 to 00-26-51-bc-e9-c8  JAF1332AEPJ

7    00-23-eb-3f-c8-68 to 00-23-eb-3f-c8-9c  JAF1333AEFN

8    00-00-00-00-00-00 to 00-00-00-00-00-00  JAF1333AEEP

Mod  Online Diag Status

---  ------------------

1    Pass

2    Pass

3    Pass

4    Pass

5    Pass

6    Pass

7    Pass

Xbar Ports  Module-Type                         Model              Status

---  -----  ----------------------------------- ------------------ ----------

1    0      Fabric Module 1                     N7K-C7010-FAB-1    ok

2    0      Fabric Module 1                     N7K-C7010-FAB-1    ok

3    0      Fabric Module 1                     N7K-C7010-FAB-1    ok

Xbar Sw              Hw

---  --------------  ------

1    NA              1.1    

2    NA              1.1    

3    NA              1.1    

Xbar MAC-Address(es)                         Serial-Num

---  --------------------------------------  ----------

1    NA                                      JAF1333AARS

2    NA                                      JAF1333AARR

3    NA                                      JAF1333AATH

1 REPLY
VIP Super Bronze

N7K-M148GT-11 powered-dn after upgrade

Hi,

It appears that after the upgrade module 8 can't power up any more.  Open a ticket with TAC and you may need to RMA the module.

HTH

2198
Views
0
Helpful
1
Replies
CreatePlease to create content