Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

NAT Confusion

Hi All

A client wants to setup a VPN with us and they want us to traffic non-RFC1918 (Public IP) address through the tunnel. The tunnel is between one of our servers and one of their servers. Our server which has a IP address of 172.16.xx.yy is already NATted to a public IP of a.b.c.d and other customers are accessing the server using https.

static (inside,outside) a.b.c.d 172.16.xx.yy netmask 255.255.255.255

Is it possible for me to assign another public IP address to the server and use that address to be sent through the tunnel or try using the a.b.c.d through the tunnel or use a policy NAT.

I have also attached a diagram.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: NAT Confusion

Policy NAT should get you in the right direction

Sent from Cisco Technical Support iPhone App

-- CCNP, CCIP, CCDP, CCNA: Security/Wireless Blog: http://ccie-or-null.net/
1 REPLY

Re: NAT Confusion

Policy NAT should get you in the right direction

Sent from Cisco Technical Support iPhone App

-- CCNP, CCIP, CCDP, CCNA: Security/Wireless Blog: http://ccie-or-null.net/
86
Views
0
Helpful
1
Replies
CreatePlease to create content