Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NAT from outside to inside

I have a NAT question

I have a cisco 1811 router connected to a customers network via a serial lan.

The Cisco 1811 is connected to my core via VPN.

The serial lan is setup at NAT outside and it's ip  is 10.10.10.1/30.

The 1811 has a 172.30.1.0/24 network that is set as NAT inside

The customer is sending data to me from a server with ip address 192.168.100.100.

Is it possible to NAT the 192.168.100.100 address to a 172.30.1.xxx address?

I cannot change the NAT designations on the interfaces because I am already doing several inside source static nats to make servers on the 172.30.1.0 network appear on their net as 192.168.100.x devices.

Also, I already have a vpn setup with another customer who is using the 192.168.100.100 address, so I need to NAT this customers ip to something else, preferebly in the ip space that is already permitted in the vpn.

thanks!

1 REPLY
Hall of Fame Super Bronze

Re: NAT from outside to inside

738
Views
0
Helpful
1
Replies