Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NAT?

Hi all,

One of our customer have a network with the next design:

Diagrama1.png

In their servers they have configured IPs only from the range 192.168.235.0/25.

All the petitions for their servers come to one of the PUBLIC IP addresses and we have to configure static NAT (we are not sure of that) to reach the servers with the private addresses (192.168.235.0/24).

We have no idea of which is the mode of this type of NAT because all this NAT is in the LAN side.

Thanks in advance,

1 ACCEPTED SOLUTION

Accepted Solutions

Re: NAT?

Hi all,

One of our customer have a network with the next design:

In their servers they have configured IPs only from the range 192.168.235.0/25.

All the petitions for their servers come to one of the PUBLIC IP addresses and we have to configure static NAT (we are not sure of that) to reach the servers with the private addresses (192.168.235.0/24).

We have no idea of which is the mode of this type of NAT because all this NAT is in the LAN side.

Thanks in advance,

Hi,

Check out the below link for brief overvie of natting and how nat is done in routers.

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094831.shtml

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093f31.shtml

Hope to help !!

Ganesh.H

2 REPLIES

Re: NAT?

Hi all,

One of our customer have a network with the next design:

In their servers they have configured IPs only from the range 192.168.235.0/25.

All the petitions for their servers come to one of the PUBLIC IP addresses and we have to configure static NAT (we are not sure of that) to reach the servers with the private addresses (192.168.235.0/24).

We have no idea of which is the mode of this type of NAT because all this NAT is in the LAN side.

Thanks in advance,

Hi,

Check out the below link for brief overvie of natting and how nat is done in routers.

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094831.shtml

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093f31.shtml

Hope to help !!

Ganesh.H

New Member

Re: NAT?

Thanks!!

180
Views
0
Helpful
2
Replies
CreatePlease to create content