Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

nating

How to do nating for a network that is not directly connected to a router (routed network) ????

example:

two routers that is directly connected one of them connected to internet and the other one connected to internal network....

Thanks

2 REPLIES

Re: nating

Natting does not mandate that the networks need to be directly connected.

For example

(10.10.10.0/24)R1 <--> R2 <--> R3(100.100.100.0/24)

On R3 you can configure

ip nat pool MYNAT 100.100.100.20 100.100.100.20 prefix-length 24

ip nat inside source list 100 pool MYNAT overload

!

access-list 100 permit ip 10.10.10.0 0.0.0.255 any

interface

ip nat inside

interface

ip nat outside

This sort of situation can be generally seen on the perimeter firewall facing the interanet which translates all the internal address to a glabal public ip pool for routing over the internet and the source networks are mostly not dorectly connected

HTH

Narayan

Community Member

Re: nating

Thanx royalblues

231
Views
0
Helpful
2
Replies
CreatePlease to create content