Native IOS is the Cisco IOS. Hybrid IOS, is used on L3 switches, where you use CatOS on the switch and IOS on the RSM, MSFC or whatever. When you use only IOS to control both L2 and L3 functionality of the switch they call it native IOS.
Ahmed is simply right, and here you are a CCO link demonstrating the difference and how to convert in the case of a Cisco Catalyst 6500, i've done it my self, and i can help you if you are going through a simillar process:
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...