One request regarding 802.1q native vlan............
.Suppose we have two switches A and B with native VLAN ID configured to 100 on both switches and we have few users connected to VLAN 1 and few users connected to VLAN 10 on a switch A with trunk link connected to another switch B.
If a user from VLAN 10 in switch A sends data to a member in same VLAN 10 in switch B, then trunk adds a VLAN ID tag to the frame sent from switch A to B, then switch will identify respective VLAN and forwards accordingly.
If a user from VLAN 1 in switch A wants to send data to a user in VLAN 1 in switch B --- is traffic sent as VLAN 1 traffic by attaching vlan id tag and not as native vlan traffic or vlan 1 traffic is considered as native vlan traffic (native vlan is set as 100) that is untagged traffic.
if vlan 1 traffic is considered as native vlan traffic then will it add native vlan ID of 100 to vlan 1 traffic?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...