further to my discussion about this, can anyone tell me if I have an untagged frame come into my switch and that goes to vlan 1, then on my trunk port between 2 switches I have say vlan 10 both ends of the link as the native vlan, will the original frame that came in on vlan 1 untagged, still be untagged once it reaches the other switch, or will it get tagged as the trunk has a different native vlan ?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...