Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

natting 192.168.1.0/24 on cisco asa

Hi all, i want to create a rule on my asa that nats inside network 192.168.1.0/24 to the ip of the outside interface for internet, im using the gui, can anyone tell me what i need to do as i dont know how to overload on them.

cheers

2 REPLIES
Cisco Employee

Re: natting 192.168.1.0/24 on cisco asa

Please use the link below for configuration

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008046f31a.shtml

HTH,Please rate if ti does.

-amit singh

New Member

Re: natting 192.168.1.0/24 on cisco asa

Hi , thanks for that, i was looking into more natting a whole class c address against the outside interface, ie overloading, on the asa, do i create a dynamic rule for this ?

cheers

Carl

499
Views
0
Helpful
2
Replies
CreatePlease to create content