Need a Solution connecting in optical fiber serv and clients
I have 1 server based in Windows 2003 server. It's situated about 3 Km from 30 pc (clients). What solutions Can I have to make to create a communication Server-Client and create my domain on this server?? Want to communicate through optical fiber from one place to another.
Re: Need a Solution connecting in optical fiber serv and clients
The distance exceeds the maximum length for multimode fiber so you are oblidged to install single mode fibers.
Preferrably, install a switch on both ends and plug your SFP's in them. Then attach the server on one side and the users on the other. I am quite confident that a single 1G will suffice so there is no need for more complex configurations.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...