Need ARP list configured on every switch when using DAI
Now we are deploying the DAI solution in our compus network to prevent from the arp attack.
Because we don't use the DHCP in our LAN, we need create the static arp list manually on the switch. As we know that ARP list is associated with VLAN, so I configured the arp list in our core switch 6509 and associated it with the specific VLAN to inspect the arp.
My question is do we need to configure the arp list on all of the switch, or just on the core switch?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.