I am trying to boot a WS-C3550-24 from a TFTP server but it is not working. I am using the "boot system tftp://x.x.x.x/imagename.bin" command, and I do a wr me. When I do a "show boot" it shows that it is configured for the appropriate tftp server. When I reload, I get the message that the file is not authorized. I already verified with a test file that this switch can access the server. (I am using Tftpd32 on a laptop by the way on a routed port coming directly off the switch. Also there are no firewalls.)
Please first of all confirm that you can reach and ping the tftp IP from the switch, then make sure that you are pointing the current directory correct on the server and that you have enabled the tftp server on tftpd32.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...