Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Need help please 6509 Pass recover SUP 720 X2

Hi,

we have purchase a refurbshed 6509 with 2X SUP720 but cannot login to it.

I have followed the Cisco document on Password recovery and have set the confreg to 0x2142 at romon but it keep giving me Rmon2, Rmon3, and son on command prompt!!

it doesn'r crash as suggested in the document.

This is an urgent need please advise.

Regards,

Mike

1 REPLY
Bronze

Re: Need help please 6509 Pass recover SUP 720 X2

After you enter the confreg command you need to boot the switch. Enter "reset" and the switch should boot without its config loaded and give you the ability to finish the recovery. Make sure you're following the password recovery guide step by step.

http://www.cisco.com/en/US/products/hw/switches/ps700/products_password_recovery09186a0080133fb1.shtml

228
Views
0
Helpful
1
Replies
CreatePlease to create content