Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

need help "converting" these catos commands to ios

We want to replace a dying Cisco WS-C2948G-GE-TX with a WS-C2950T-24. The 2948 has CatOS while the 2950 has Cisco IOS.

The 2948 was configured by someone who left the company a while while back. I'd like to duplicate the config of it on the 2950. Here are the settings of the 2948:


Console> (enable) sh config






#time: Mon May 11 2015, 03:45:41


#version 8.3(2)GLX



#system web interface version(s)

set config mode text nvram



set feature dot1x-radius-keepalive disable


#frame distribution method

set port channel all distribution mac both


#Local User

set localuser user username password $1$3LOg$wmSL4EobKoom8hZ54Pbsf1 privilege 15



set vtp domain domainname



set interface sc0 43

set interface sl0 down

set interface me1

set ip alias default



set rcp username cgi-edm



set ip dns server primary

set ip dns server

set ip dns domain



set logging console disable


#http configuration

set ip http server enable


#multicast filter

set igmp filter disable


#module 1 : 0-port Switching Supervisor


#module 2 : 52-port 10/100/1000 Ethernet

set vlan 43 2/46-47

set port speed 2/47 10

set port duplex 2/47 full

clear trunk 2/47 1-1005,1025-4094

set trunk 2/47 off dot1q

clear trunk 2/48 2-40,44-1005,1025-4094

set trunk 2/48 on dot1q 1,41-43


Console> (enable)


I've changed some of the IP addresses to fictitious ones.

2/46, 2/47, 2/48 will be equivalent to fa0/22, fa0/23, fa0/24 respectively.

So far I've assigned fa0/22 and fa0/23 on the 2950 to vlan43 and I've set fa0/23 to 10/full. I'm not sure how to do the rest :(

  • LAN Switching and Routing
Cisco Employee

Re: need help "converting" these catos commands to ios

This widget could not be displayed.