cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2194
Views
0
Helpful
1
Replies

Need software like Packet Tracer somewhat more advanced that contains the switches 3560 which I can try some configurations

josedunet
Level 1
Level 1

Hello,

I wonder if there is software like Packet Tracer somewhat more advanced that contains the switches 3560 which I can try some configurations before putting the switch in production.

Tkanks in advance.

1 Reply 1

ansalaza
Level 1
Level 1

Dynamips cannot emulate a switch and most likely will never be able to do since most of the switching logic is being held in hardware. Dynamips provides a simple virtual switch, it does not emulate Catalyst switches (although it does emulate the NM-16ESW).

Packet Tracer 5.2.1.0006 has a 3560, but I wouldn't trust any simulation and would rather use the Switch without hooking it to the Production Network...try running your tests in your own separate network "lab".

Packet Tracer 3560:

Switch>sh ver
Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(37)SE1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 05-Jul-07 22:22 by pt_team
Image text-base: 0x00003000, data-base: 0x01500000

ROM: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEC, RELEASE SOFTWARE (fc4)

System returned to ROM by power-on

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C3560-24PS (PowerPC405) processor (revision P0) with 122880K/8184K bytes of memory.
Processor board ID CAT1037RJF7
24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)

63488K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 0060.4708.E30E
Motherboard assembly number     : 73-9673-09
Power supply part number        : 341-0029-05
Motherboard serial number       : CAT103758VY
Power supply serial number      : DTH1036C7UB
Model revision number           : P0
Motherboard revision number     : A0
Model number                    : WS-C3560-24PS-E
System serial number            : CAT1037RJF7
Top Assembly Part Number        : 800-26380-04
Top Assembly Revision Number    : B0
Version ID                      : V06
CLEI Code Number                : COM1100ARC
Hardware Board Revision Number  : 0x01


Switch   Ports  Model              SW Version              SW Image
------   -----  -----              ----------              ----------
*    1   26     WS-C3560-24PS      12.2(37)SE1             C3560-ADVIPSERVICESK

Configuration register is 0xF

Switch>

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco