Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need some help with forwarding traffic from one subnet to another

Hi all,

I’ve configured a small WLAN for a school that wants to have wireless network access for their staff as well as for guests doing presentations. They want the staff to have access to everything on the 192.168.1.0 /24 network as well as the Internet. They want the guests to only have access to the Internet.

I have attached a picture which shows how the network has been configured with 4 Cisco AP1242G AP’s attached to a Cisco SF302-08MP PoE switch and then to a Symantec Security Gateway to the Internet.

I can authenticate wirelessly to the STAFF SSID and ping anything on the 192.168.1.0 /24 network and access the Internet.

I can authenticate wirelessly to the GUEST SSID and ping anything on the 172.16.1.0 /24 network, but not anything on the 192.168.1.0 /24 network (which is what we want). However, when on the GUEST network you can’t access the Internet. I added a default route to the Cisco 302-08MP switch to 192.168.1.1 (Symantec firewall) thinking that would forward the traffic from 172.16.1.0 /24 to the Symantec firewall out to the Internet, but that isn’t working.

How would I go about getting the traffic from 172.16.1.0 /24 to hit the Symantec firewall and the Internet, without hitting anything else on 192.168.1.0 /24? Do I need to put the Symantec firewall in a different subnet like 192.168.2.0 /24? Am I missing anything else?

I’ve worked with Extreme Networks & HP / 3Com CLI in the past, but never with Cisco and never with web based management. I volunteered to help this small private school with their network setup, but I need some help to get past this hurdle. Any direction / assistance anyone can provide would be very much appreciated!!!

Thanks,

Mason

Everyone's tags (2)
1 REPLY
Bronze

Need some help with forwarding traffic from one subnet to anothe

Does your Symantec Gateway has a route back to 172.16.1.0 network?

Hope this helps

Eugen

872
Views
0
Helpful
1
Replies