Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Need urgent help on ip device tracking max command

Hi ,

I need urgent help, I have installed 30  3650 devices in client location

I want to run ip device tracking max 0 command on cisco 3650 switches but I think its not supported , if any one can suggest if any alternate for this command which we can run on 3650 Switches

7 REPLIES
VIP Purple

Are you wanting to disable

Are you wanting to disable device tracking?

New Member

Yes I want to disable ,

Yes I want to disable ,

Thanks a lot for your help

New Member

Hi Phlip ,

Hi Phlip ,

This command also not supporting on 3650-FQM  at interface level - software verion 16.3.3, please suggest

VIP Purple

I would not run 16.x code

I would not run 16.x code unless you really have to.  It is very new.  I would stick to the more mature 3.7 or 3.6 train.

Hall of Fame Super Gold

I would not run 16.x code

I would not run 16.x code unless you really have to.

He doesn't have a choice, Philip.  FQM requires a minimum of 16.3.1.  

Bad luck, I guess. 

VIP Purple

If you want to disable it I

If you want to disable it I think the command is something like "nmsp attachment suppress".  I think this might have to be applied at the interface level.

Hall of Fame Super Gold

IP Device Tracking needs to

IP Device Tracking needs to be enabled globally and at the interface level.  

The minimum lines of configuration needed are the following: 

  1. Globaly:  ip device tracking
  2. Interface-level:  ip device tracking max <ANY NUMBER HIGHER THAN 0>

To disable IP Device Tracking, use the global command "no ip device tracking" and remove the interface-level command.

125
Views
0
Helpful
7
Replies
CreatePlease to create content