cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
292
Views
0
Helpful
2
Replies

Need Vlan Help

rostoski123
Level 1
Level 1

Hey Everyone,

I am having some issues with my Switch/Vlans.

Here we go, I have a couple of servers that i need to segment for a remote user. This user will only have a remote VPN to these 3 servers in the x.x.79.0 network in Vlan 20.. Here is what I have:

x.x.79.x is in VLAN 20 Server Network

3560 layer 3 switch

VPN Concentrator IP x.x.80.3

switch config:

vlan 20

name ATI20

interface vlan 20

ip address x.x.79.1 255.255.255.0

ip route x.x.79.x 255.255.255.0 x.x.80.3

interface gigabitethernet 0/30

switchport mode access

switchport access vlan 20

My server can ping switch vlan 20 interface. But cannot ping out to VPN Concentrator.

Also the 3560 switch cannot ping the x.x.79.x server. What am I missing?

Thanks Everyone

Ryan

2 Replies 2

glen.grant
VIP Alumni
VIP Alumni

What vlan is the connection to vpn in ? You should post that info also . Check the layer 2 and 3 info for the connection to the vpn . Whats the switch management address and what vlan does that sit in ???

Its in VLan1.

There are two mgmt address, 1 in VLan1 and other Vlan20.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card