Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Purple

netflow command

Whats the difference between putting "ip route-cache flow" on an interface or "ip flow ingress " . Is this just a code version issue on 12.4T code? I put ip route-cache flow on the interface and it changes to ip flow ingress on the interface by itself. Running 12.4.24T1 .

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: netflow command

Hi Glen,

Yes, command have been changed with code but both achieve same function. I remembered that I was not able to use 'ip flow ingress' in older version code.

Usage guideline of this command explicitly mentioned about this.

http://www.cisco.com/en/US/docs/ios/netflow/command/reference/nf_01.html#wp1049320

2 REPLIES
Bronze

Re: netflow command

Hi Glen,

Yes, command have been changed with code but both achieve same function. I remembered that I was not able to use 'ip flow ingress' in older version code.

Usage guideline of this command explicitly mentioned about this.

http://www.cisco.com/en/US/docs/ios/netflow/command/reference/nf_01.html#wp1049320

Purple

Re: netflow command

Thanks that's what I thought . It even automatically puts it on any subinterfaces on the router without typing anything in . This 12.4.24T code has some differences , like the ntp server command used to be right at the bottom of the config, they have moved it now so that it is like right under all the AAA commands way up top . Not sure why they did that ...

158
Views
0
Helpful
2
Replies
CreatePlease login to create content