Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Netflow on 4510

I have i customer with a ws-c4510R-E , the supervisor is a 6-E.

They want netflow enabled on the switch.

It is possible?

5 ACCEPTED SOLUTIONS

Accepted Solutions

Re: Netflow on 4510

Hi,

  Sorry guy, It doesn't support netflow on your supervisor(6-E).

Ref: http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/53SG/configuration/nfswitch.html

HTH,

Toshi

Cisco Employee

Netflow on 4510

Yes, Netflow is supported with Sup v-10 GE with an integrated daughter card.

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps6033/product_data_sheet0900aecd801c5c66_ps4324_Products_Data_Sheet.html

Netflow is also supported on new SUP7-E

Cheers,

-amit singh

Cisco Employee

Netflow on 4510

Yes it is supported.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/product_data_sheet0900aecd801792b1.html

However, you can have only classic cards in slot 8-10.

Hope this helps.

-amit singh

Cisco Employee

Netflow on 4510

Hi Rafel,

SUP 7-E of course

This gives you 848 Gbps switching capability with new 4510R+E chassis with 48 Gbps per slot. Even with the older 4510R-E chassi, it gives 24Gbps per slot. SUP 5 only support 6 Gbps per slot as its being a classic sup engine.

SUP 7- E supports many advanced features like Flexible Netflow ( you can define your custom fields for netflow), Hardware ready for VSS, MACSEC ready, Wireshark logging on-board, UPOE etc...

Please have a look at the datasheet.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/data_sheet_c78-612364.html

Cheers,

-amit singh

Cisco Employee

Netflow on 4510

You need minimum IP Base image IOS -XE 3.1 on the SUP7-E.

Make sure that you have the IP base loaded on the system.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_23474.html#wp2518375

HTH,

-amit singh

9 REPLIES

Re: Netflow on 4510

Hi,

  Sorry guy, It doesn't support netflow on your supervisor(6-E).

Ref: http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/53SG/configuration/nfswitch.html

HTH,

Toshi

New Member

Netflow on 4510

What about the Supervisor Engine V-10GE.

Cisco Employee

Netflow on 4510

Yes, Netflow is supported with Sup v-10 GE with an integrated daughter card.

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps6033/product_data_sheet0900aecd801c5c66_ps4324_Products_Data_Sheet.html

Netflow is also supported on new SUP7-E

Cheers,

-amit singh

New Member

Netflow on 4510

is the sup7-e supported on 4510-E ?

Cisco Employee

Netflow on 4510

Yes it is supported.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/product_data_sheet0900aecd801792b1.html

However, you can have only classic cards in slot 8-10.

Hope this helps.

-amit singh

New Member

Re: Netflow on 4510

which supervisor is better? the sup7-e vs Sup v-10 GE ?

is netflow supported on the sup7-e with the 4510R-E chassi?

Cisco Employee

Netflow on 4510

Hi Rafel,

SUP 7-E of course

This gives you 848 Gbps switching capability with new 4510R+E chassis with 48 Gbps per slot. Even with the older 4510R-E chassi, it gives 24Gbps per slot. SUP 5 only support 6 Gbps per slot as its being a classic sup engine.

SUP 7- E supports many advanced features like Flexible Netflow ( you can define your custom fields for netflow), Hardware ready for VSS, MACSEC ready, Wireshark logging on-board, UPOE etc...

Please have a look at the datasheet.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/data_sheet_c78-612364.html

Cheers,

-amit singh

New Member

Re: Netflow on 4510

what I need to have netflow with sup7-E on this chassi (4510R-E)?

Cisco Employee

Netflow on 4510

You need minimum IP Base image IOS -XE 3.1 on the SUP7-E.

Make sure that you have the IP base loaded on the system.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_23474.html#wp2518375

HTH,

-amit singh

2863
Views
4
Helpful
9
Replies
CreatePlease to create content