Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NetFlow sends only interface-table, no templates, no flows

Hi,

configured NetFlow on a 3750-X with Network Module,

but it generates only interface-tables, no templates or flows.

Here my Config:

flow record Ingress
 match datalink source-vlan-id
 match datalink dot1q priority
 match datalink mac source-address
 match datalink mac destination-address
 match ipv4 version
 match ipv4 tos
 match ipv4 ttl
 match ipv4 protocol
 match ipv4 source address
 match ipv4 destination address
 match transport source-port
 match transport destination-port
 match interface input physical snmp
 collect interface output snmp
 collect counter flows
 collect counter bytes
 collect counter packets
 collect timestamp sys-uptime first
 collect timestamp sys-uptime last
!
!
flow record Egress
 match datalink destination-vlan-id
 match datalink dot1q priority
 match datalink mac source-address
 match datalink mac destination-address
 match ipv4 version
 match ipv4 tos
 match ipv4 ttl
 match ipv4 protocol
 match ipv4 source address
 match ipv4 destination address
 match transport source-port
 match transport destination-port
 match interface output physical snmp
 collect interface input snmp
 collect counter flows
 collect counter bytes
 collect counter packets
 collect timestamp sys-uptime first
 collect timestamp sys-uptime last

 

flow exporter export-to-Paessler
 description PRTG Network Monitor - NetFLow
 destination 10.10.10.27
 source Vlan5
 transport udp 9991
 template data timeout 60
 option interface-table timeout 60
!
!
flow monitor FlowMon_Ingress
 record Ingress
 exporter export-to-Paessler
 cache timeout active 60
!
!
flow monitor FlowMon_Egress
 record Egress
 exporter export-to-Paessler
 cache timeout active 60

!

interface Vlan91

 ip flow monitor FlowMon_Ingress input
 ip flow monitor FlowMon_Egress output

 

 

sh switch service-modules
Switch/Stack supports service module CPU version: 03.00.65
                          Temperature                     CPU
Switch#  H/W Status       (CPU/FPGA)      CPU Link      Version
-----------------------------------------------------------------
 2       OK               58C/66C         connected     03.00.65

 

 

 

 

90
Views
0
Helpful
0
Replies
CreatePlease login to create content