I have a problem on my network that has kept me sleepless nights. I am running a Catalyst 6500 at the core with 3750 switches at the distribution layer,2950 at the access layer. I am running OSPF between the Core and the distribution.The clients on the network are all on DHCP apart from the servers and network elements like switches and routers. ocassionally, some clients experience "network cable unplug" and I have tried to trace the source of this problem without success.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...