I'd appreciate some input in here. I'm relatively new to design decisions. Here's the plan so far, feel free to completely change it given your experiences.
I have about 10 vlan's in office A, this is connected to various other sites via WAN's. In Office A I have an internet vlan and the rest of the vlan's are restricted access via acl's on the vlan, (3750-E switches). Moving forward I want to evaluate whether this is the best decision. Shall I keep the current setup or is there a better way i.e add a firewall or separate the network somehow?
3) No, remote sites don't utilise the local internet connection. Each site has their own internet connection.
4) I've just joined the company and here all vlan's are locked down by acl's restricting access in and out of the vlan. I wanted to address this and see if it can be implemented better in any way. Basically we have different trading environments each in their own vlan, with internet enabled pc's in an internet vlan.
5) I am going to introduce VOIP this year, and managing these lists is becoming a bit of a head ache.
Thanks for taking the time, if you need more please let me know as I'm not 100% sure what information is needed to address this question.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...