I'd appreciate some input in here. I'm relatively new to design decisions. Here's the plan so far, feel free to completely change it given your experiences.
I have about 10 vlan's in office A, this is connected to various other sites via WAN's. In Office A I have an internet vlan and the rest of the vlan's are restricted access via acl's on the vlan, (3750-E switches). Moving forward I want to evaluate whether this is the best decision. Shall I keep the current setup or is there a better way i.e add a firewall or separate the network somehow?
3) No, remote sites don't utilise the local internet connection. Each site has their own internet connection.
4) I've just joined the company and here all vlan's are locked down by acl's restricting access in and out of the vlan. I wanted to address this and see if it can be implemented better in any way. Basically we have different trading environments each in their own vlan, with internet enabled pc's in an internet vlan.
5) I am going to introduce VOIP this year, and managing these lists is becoming a bit of a head ache.
Thanks for taking the time, if you need more please let me know as I'm not 100% sure what information is needed to address this question.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...