"Improve" is subjective, and depends on what the business and technical gaps include. Just some initial thoughts on the basic design:
1. Does it appear to you that any one device seems to be servicing a lot of the network's traffic?
2. Are there any major single points of failure? Depending on the nature of the network and applications, it may be okay if a single user, or maybe even a closet switch, is down for a short period. But looking over your design, do you see any single points (devices) for which a failure could cause outages across extended portions of the network or the entire network?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...