Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

network mgiration testing - cant ping between networks

lab test config

wan_rtr (new)-10.10.150.1

wan_rtr )old)-172.16.0.1

problem:

wan_rtr(new) cant ping any vlans on 3750_new (it can ping 10.10.151.2)

wan_rtr(new) cant ping 3750_old, 2950(old)

wan_rtr(old) CAN ping 3750(old), 2959(old)

wan_rtr(old) can't ping any vlans on 3750_new

summary: can't ping between the two networks.

I'm sure this is simple routing issue but i'm missing it somewhere. thanks for any help.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: network mgiration testing - cant ping between networks

You are missing some configuration:

2950 new:

ip default-gateway 10.10.151.1

3750 New:

ip routing

ip route 0.0.0.0 0.0.0.0 10.10.150.1

3750 Old:

ip default-gateway 172.16.0.11

2950 Old

ip default-gateway 172.16.0.11

WAN Router:

ip route 10.10.152.0 255.255.255.0 10.10.150.2

ip route 10.10.151.21 255.255.255.224 10.10.150.2

THe above should solve your connectivity issue,

Let me know how it goes and appreciate your rating,

Regards,

1 REPLY
Silver

Re: network mgiration testing - cant ping between networks

You are missing some configuration:

2950 new:

ip default-gateway 10.10.151.1

3750 New:

ip routing

ip route 0.0.0.0 0.0.0.0 10.10.150.1

3750 Old:

ip default-gateway 172.16.0.11

2950 Old

ip default-gateway 172.16.0.11

WAN Router:

ip route 10.10.152.0 255.255.255.0 10.10.150.2

ip route 10.10.151.21 255.255.255.224 10.10.150.2

THe above should solve your connectivity issue,

Let me know how it goes and appreciate your rating,

Regards,

132
Views
0
Helpful
1
Replies