I've an option on some 2610XM's cheap for my lab, but I need to have 2FE ports in each. Some people have told me the NM-1FE2W and NM-2FE2W will work in the XM's and some others have said they wont!
Any help would be great.
Thanks in advance.
The "Portable Product Sheet - Module Crossref" confirms - no support for NM-1FE2W in the 2600XM routers. The NM-1FE2W is only supported in the 2691, 3620, 3640, 366x, 3725, 3745, 3825, and 3845 routers.The only supported LAN Network Modules in the 2600XMs are the NM-1E, NM-4E, and NM-16EWS. The only supported "WIC Slot Adding Network Modules" in the 2600XMs is/are the NM-2W.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...