Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

network segmentation with 2921 and Internet bandwidth splitting

Hi.

I'm confused about something.

Now I have a 172.16.0.0/16 network with a def. gw. for internet where is a MS Forefront TMG 2010 with BSplitter for traffic shaping.

I purchased an 2921, 2,5 GB RAM, security+data license and an EHWIC-D-8ESG.

I made 4 subnets in a test environment with some access-lists, nothing fancy yet.

How can I use FF TMG for bandwidth management, where should I put it? For those 4 subnets the def. gw. is, normally, the 2921 router. TMG is splitting traffic by client IP....

Help!

1 REPLY
New Member

network segmentation with 2921 and Internet bandwidth splitting

Nothing...

Let me put it in other way: let's say I have 3 subnets: 172.16.0.0/24, 172.16.2.0/23 and 172.6.5.0/24

Gi0/1 - 172.16.0.1

Gi0/2 - 172.15.5.1

Gi0/1/0 -  switchport access vlan 2 - Vlan2 - 172.16.2.1

I need to route traffic between those 3 subnets and control it with some ACLs and:

     - the internet traffic from 172.16.0.0/24 to go through 172.16.0.32

     - the internet traffic from 172.16.2.0/23 to go through 172.16.2.32

and

     - the internet traffic from 172.16.5.0/24 to go through 172.16.5.32

Is this scenario even possible?

Thanks!

508
Views
0
Helpful
1
Replies
CreatePlease login to create content