Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Network slow issue / High latency in ping reply in LAN

Hi,

I am facing some issue below :

LAN : Ping from any host below is giving max latency upto 200ms,

where it is expected to be <1ms

as per our LAN standards

any pc > sw01 > core_sw

sw01 > core_sw

core_sw > sw01

WAN :

ping latency is equal to 1 ms latency with remote neighbor router

Our Network :<=WAN=>router > core_sw > sw01 > pc

2nos 3845 routers with point to point leased line connectivity

2nos. 3750 stacked L3 core switches

20nos. 3560 L2 switches connected with redundandant links to both core switches.

Network infrastructure layout implemented by the best team as per international standards

Observation :

STP has selected one of the 20 switches and not core switch

>Request help to reduce network latency

Do making Core switch to be the root bridge for all vlans sort out the issue!

regards

Kaushik Vadali

10 REPLIES
New Member

Re: Network slow issue / High latency in ping reply in LAN

1. Make your Core switch STP root for all vlans

2. Manually prune vlans off unneeded trunk links, decreases STP instances

3. do "show proc cpu sorted", what process is mostly used?

Questions?

1. Are you using jumbo frames anywhere?

2. Are you doing Policy Based Routing?

New Member

Re: Network slow issue / High latency in ping reply in LAN

Hi,

I worry about effect of forcing core switch to root switch in a live network.

1. how much time it may take for STP convergence

2. we use only 2 vlans (data and voice) and never thought of pruning

3. show proc cpu sorted output is attached

4. no jumbo frames are used and detected on any interface

5. no PBR in LAN

regards

Kaushik

New Member

Re: Network slow issue / High latency in ping reply in LAN

1. What is serving your default gateway for the clients? switch or 3800?

2. 20 switches connecting into stacked core?

Pings between switch and router are what?

Pings between client and switch are what?

Pings between client and router are what?

New Member

Re: Network slow issue / High latency in ping reply in LAN

1. Default gateway for the clients is core switch.

2. All 20 switches are connected to stacked core switches

pings stats

core switch to router, client to switch, client to router

90% <3 ms, 5% 4-10ms,5% 10ms to 100+ms

The slowness problem is present for long time and our audit has told us to rectify

regards

Kaushik Vadali

New Member

Re: Network slow issue / High latency in ping reply in LAN

Your connection between your switches and core should be <1ms

I would try to change the STP root for all vlans.

How many hosts on this data vlan?

Also, check your MTU to be 1500.

New Member

Re: Network slow issue / High latency in ping reply in LAN

Dear Ralph,

Your connection between your switches and core should be <1ms

---Its not! for 10% pings

I would try to change the STP root for all vlans.

--- How much time it may take for STP convergance. As down time of morethan 1 minute is not allowed without scheduling

How many hosts on this data vlan?

--- 1500 hosts in 8 hrs, 24x7 operations

Also, check your MTU to be 1500.

--- MTU is default 1500 on all devices

regards

Kaushik Vadali

New Member

Re: Network slow issue / High latency in ping reply in LAN

1500 clients on 1 vlan?

Theres your problem!

Breakdown that broadcast domain to use /24's and not anything bigger.

Since you connect the access switches to the stacked core, you really dont have any STP blocked ports and cannot have a loop.

Changing the STP root is best practice in this case but should not have an impact on this problem. I think you may lose connection for 1-3 secs only.

But I think you have a bigger problem and that may be your vlan size.

New Member

Re: Network slow issue / High latency in ping reply in LAN

Dear Ralph,

I agree that we are using more hosts per vlan but cannot use /24 mask as per organization policy. I can use max /22 mask and limit to 1024 hosts

All hosts are DHCP enabled and work on single process, client server based CRM application

I plan for scheduling of core switch to be the root bridge and update you on the outcome soon

One Question - Do intermitant high latency (15 to 150 ms)is the cause for network slowness? Some points to note on Client systems are

- They are not working on internet

- They run and access only single CRM application located on the remote side of WAN

- Accessing common file server located on LAN

regards

Kaushik Vadali

New Member

Re: Network slow issue / High latency in ping reply in LAN

So this application sits on another subnet on the remote side of the wan? if so you may have to look into tweaking it to serve multiple subnets and not just this one subnet your using as your data vlan. or is it spanned onto the same vlan?

For ex. Keep in mind that when a pc sends out an arp request for this app server, the switch floods this arp request to the whole vlan. Every host (1500 of them) will hear it and have to process it.

Try this. Create an new test vlan and SVI. Put a test pc in this vlan and point the default gateway to this svi. Do some tests.

Can you send your 3750 and 3560 config without actual IPs?

New Member

Re: Network slow issue / High latency in ping reply in LAN

Dear Ralph,

I will try and update soon

regards

Kaushik Vadali

1930
Views
3
Helpful
10
Replies
CreatePlease to create content