Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

networks across router

I have a 2800 series router that I'm using for a frame router. it has 2 gigabit interfaces, but I cannot get the traffic to communicate across these two interfaces. it will ping the address of the interfaces but nothing beyond that

3 REPLIES

Re: networks across router

Hi

what do u mean by frame router here ? what you have configured in your interfaces ? also what you have connected onto those interfaces ?

regds

New Member

Re: networks across router

int g0/0 is connected to my wireless gateway device. int g0/1 is connected to a switch. I cannot ping beyond the interface address.

Silver

Re: networks across router

Hi,

Have you check routing properly?

Are you getting hit on the same interface?

You can check Hit by following command.

sh int gi0/1 | i input

Or send me you configuration and output of following command.

1)sh ip int brief

2) 3 times sh int gi0/0 and gi0/1

3) Show IP route

Regards,

Dharmesh Purohit

114
Views
0
Helpful
3
Replies
CreatePlease login to create content