cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
351
Views
0
Helpful
3
Replies

networks across router

computer
Level 1
Level 1

I have a 2800 series router that I'm using for a frame router. it has 2 gigabit interfaces, but I cannot get the traffic to communicate across these two interfaces. it will ping the address of the interfaces but nothing beyond that

3 Replies 3

spremkumar
Level 9
Level 9

Hi

what do u mean by frame router here ? what you have configured in your interfaces ? also what you have connected onto those interfaces ?

regds

int g0/0 is connected to my wireless gateway device. int g0/1 is connected to a switch. I cannot ping beyond the interface address.

Hi,

Have you check routing properly?

Are you getting hit on the same interface?

You can check Hit by following command.

sh int gi0/1 | i input

Or send me you configuration and output of following command.

1)sh ip int brief

2) 3 times sh int gi0/0 and gi0/1

3) Show IP route

Regards,

Dharmesh Purohit

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: