New SUP720 boot string issue

[chris_hodge]

Why do I get the folowing response when I run command "show diagnostic sanity" on a new 720 out of the box from Cisco Systems?

Invalid boot image "bootdisk:s72033-ipservices_wan-vz.122-18.SXF8.bin" specified in the boot string.

Please check your boot string.

None of the images specified in the boot string are valid.

Please specify at least one valid image in the boot string to ensure the

switch is in a bootable state.

Could not verify boot image "bootdisk:s72033-ipservices_wan-vz.122-18.SXF8.bin" specified in the boot string on the slave.

[ankbhasi]

Hi Chris,

Can you confirm me few things here:-

1) Output of "sh boot"

2) Output of "sh mod"

3) Output of "sh run | in boot"

4) dir sup-bootflash: & dir disk0:

5) Output of "sh version"

Regards,

Ankur

[chris_hodge]

Great here's the info that you requested.

[ankbhasi]

Hi Chris,

I believe I am close but need few more details to confirm you the same.

Just paste the output of "dir slavedisk0:" & "dir slavesup-bootflash:"

Regards,

Ankur