Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

New SUP720 boot string issue

Why do I get the folowing response when I run command "show diagnostic sanity" on a new 720 out of the box from Cisco Systems?

Invalid boot image "bootdisk:s72033-ipservices_wan-vz.122-18.SXF8.bin" specified in the boot string.

Please check your boot string.

None of the images specified in the boot string are valid.

Please specify at least one valid image in the boot string to ensure the

switch is in a bootable state.

Could not verify boot image "bootdisk:s72033-ipservices_wan-vz.122-18.SXF8.bin" specified in the boot string on the slave.

3 REPLIES
Cisco Employee

Re: New SUP720 boot string issue

Hi Chris,

Can you confirm me few things here:-

1) Output of "sh boot"

2) Output of "sh mod"

3) Output of "sh run | in boot"

4) dir sup-bootflash: & dir disk0:

5) Output of "sh version"

Regards,

Ankur

New Member

Re: New SUP720 boot string issue

Great here's the info that you requested.

Cisco Employee

Re: New SUP720 boot string issue

Hi Chris,

I believe I am close but need few more details to confirm you the same.

Just paste the output of "dir slavedisk0:" & "dir slavesup-bootflash:"

Regards,

Ankur

153
Views
0
Helpful
3
Replies
CreatePlease login to create content