Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member

NEXUS 2000 : interface port-channel103

Hello,

I have the following configuration for NEXUS 2000 single homed :

interface port-channel103
  switchport mode fex-fabric
  fex associate 103

Does the best practice is to configure this port-channel in trunk and define the vlans allowed or keep it like this ?.

Thanks a lot,

Regards

David.

2 REPLIES
Cisco Employee

Re: NEXUS 2000 : interface port-channel103

Hi David,

What you have configured is good. Think the Fex-fabric ports as a internal path between N5K and N2K, just like the path between supervisor and a line card. You don't need to configure trunk or access mode on it.

HTH,

Lei Tian

New Member

Re: NEXUS 2000 : interface port-channel103

Hello,

Thank you for your feedback,

David.

Date: Fri, 24 Sep 2010 20:00:29 -0600

From: supportforums-donotreply@jivesoftware.com

To: davidguigo@hotmail.com

Subject: New message: "NEXUS 2000 : interface port-channel103"

DAVID GUIGO,

A new message was posted in the Discussion thread "NEXUS 2000 : interface port-channel103":

https://supportforums.cisco.com/message/3187875#3187875

Author : Lei Tian

Profile : https://supportforums.cisco.com/people/letian

Message:

454
Views
0
Helpful
2
Replies
CreatePlease to create content