Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Nexus 3524 disabled ports

On a Nexus 3524, which of the 48 ports are enabled by default 1-24? Is there a command to list the ports that are enabled? If cables are connected to the disabled ports what will be their status?

5 REPLIES
VIP Super Bronze

try:show interface briefthis

try:

show interface brief

this will tell you what ports are up and what ports are down.

HTH

New Member

The command shows the

The command shows the connection status of the ports but I would like to see the license status of the ports. On a Nexus 3524 without a 48-port license only 24 of the 48 ports are enabled. Is there a command that shows the license status of the ports?

VIP Super Bronze

No, there is no command to

No, there is no command to show the license status for ports.

HTH

Cisco Employee

Hi, Please do "show license

Hi,

 

Please do "show license usage" and check if this license below is installed. N3548-24P-UPG= .

If its just base license, only the first 24 ports will be usable.

 

HTH

Jay Ocampo

New Member

Hello Jay,Regarding the

Hello Jay,

Regarding the buffer space for Nexus 3524. Are all the 3 x 6MB of buffers available for the 24 ports?

Thanks,
Ed

624
Views
0
Helpful
5
Replies