Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Nexus 5000

Can anyone explain what the purpose of the Internal cross-connect ports on Nexus 5010 or 5020, I can't find it on any of the docs.

Thanks,

Roger.

4 REPLIES
New Member

Re: Nexus 5000

bump

New Member

Re: Nexus 5000

Up!

I have the same doubt. Maybe can I use for vpc peer-link?

Tks,

RL

New Member

Re: Nexus 5000

Found the answer in the following presentation from Cisco Live:

ftp://ftp.ics.kiev.ua/pub/Cisco/Cisco%20Live%202010/BRKARC-3452.pdf

In short, "Ports L1 and L2 are reserved for use with 'Unified Computing System' Fabric Interconnects", as the Nexus 5010/5020 share a common hardware platform with the UCS 6120/6140XP.  These ports are therefore not enabled.

The mgmt1 interface is also not enabled.

Best regards,

Greg Walker

New Member

Re: Nexus 5000

cisco tells me that mgmt 1 will be enabled in a future NXOS release

2891
Views
0
Helpful
4
Replies