Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Nexus 5500 Object Tracking and Routes

Hi,

I would like to configure my switch to remove a static route from the routing table if a destination becomes unreachable. In IOS, this would be simple with IP SLAs, however, they are not in the Nexus 5000 series platform, only the 7000 series, which we don't have.

Is there are way I can achieve the same thing with object tracking?

I have configured:

ip route 10.1.1.0/24 10.1.2.1

track 10 ip route 10.1.1.0/24 reachability

However, I'm not sure if I need additional configuration to remove the route from the routing table.

 

Thanks for your help

 

Everyone's tags (4)
2 REPLIES

Hi ,       Do you want to run

Hi ,

       Do you want to run this track on default VRF or non-default VRF ?? . You configuration should work for default VRF .

If you want run this under non-default VRF then you need to have additional command 

switch(config-track)# vrf member <Name>

 

HTH

Sandy

Community Member

I don't think this will work

I don't think that will work the way you expect it to.

One workaround is described in this related question: https://supportforums.cisco.com/discussion/11719336/ip-sla-nexus-5500-series

 

313
Views
0
Helpful
2
Replies
CreatePlease to create content