Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Nexus 5500 Unified Ports FC Configuration

Hi, I know about following Limitation for Configuring unified Ports on Nexus5000 as FC-Ports

In each module, continuous set of ports can be in configured as Ethernet or FC.

Eth ports have to be the first set and they have to be one contiguous range. FC ports have to be second set and they have to be contiguous as well.

Number of Ethernet and FC ports on a module can be changed.

From Configuration of UCS6248 with UCS-Manager I know that we are only able to configure Pairs of Ports as FC (eg. 31-32 or 29-32 or 27-32)

Because UCS6248 is more or less N5K my question if this limitation is also on Nexus5500? Or is it possible to configure an odd number of ports as FC-Port ? /eg. (30-32, 28-32, 26-32)

Thx in advance

Hubert

423
Views
0
Helpful
0
Replies