09-02-2012 02:06 AM - edited 03-07-2019 08:39 AM
Hi !
does anyone knows would the layer 3 daughter card on a nexus 5548up would support -
netflow
vrf (import/export rd's between vrfs)
policy based routing
Thanks
Solved! Go to Solution.
09-02-2012 05:11 AM
Hello Hummus,
About the support of the listed feature please find some related informations :
Netflow is not supported on the 5548 (even with a L3 duaghter card).
Q. Does the Cisco Nexus 5548P Switch hardware support NetFlow?
A. No. The Cisco Nexus 5548P Switch hardware does not support NetFlow.
And also check =>
Unlike N7k, the feature is not supported (at this time). According to the last configuration guide =>
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/unicast/521_N11/l3_virtual.html#wp1082535 => Cisco NX-OS prevents route leakage( import or export) between VRFs.
Aslo the subjected is discussed on this link => https://supportforums.cisco.com/thread/2123555. At the time being, route leaking is not supported on the Nexus 5500 with L3 module.
About PBR I was reading this post https://supportforums.cisco.com/message/3450230#3450230. According to Cisco guys on last march, it was not supported in the current releases, but is in the roadmap. When checking the last release notes 5.2(1)N1(1a) there is no reference on PBR support, so I suppose it is still not supported.
Hope that helps.
Best regards.
Karim
09-02-2012 12:48 PM
09-02-2012 05:11 AM
Hello Hummus,
About the support of the listed feature please find some related informations :
Netflow is not supported on the 5548 (even with a L3 duaghter card).
Q. Does the Cisco Nexus 5548P Switch hardware support NetFlow?
A. No. The Cisco Nexus 5548P Switch hardware does not support NetFlow.
And also check =>
Unlike N7k, the feature is not supported (at this time). According to the last configuration guide =>
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/unicast/521_N11/l3_virtual.html#wp1082535 => Cisco NX-OS prevents route leakage( import or export) between VRFs.
Aslo the subjected is discussed on this link => https://supportforums.cisco.com/thread/2123555. At the time being, route leaking is not supported on the Nexus 5500 with L3 module.
About PBR I was reading this post https://supportforums.cisco.com/message/3450230#3450230. According to Cisco guys on last march, it was not supported in the current releases, but is in the roadmap. When checking the last release notes 5.2(1)N1(1a) there is no reference on PBR support, so I suppose it is still not supported.
Hope that helps.
Best regards.
Karim
09-02-2012 12:48 PM
No for all three of your questions.
HTH,
jerry
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide