Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

NEXUS 5596 Radius

Hi there,

Thanks for reading.  I have a NEXUS 5596 which I'm trying to get talking to a Windows 2012 Radius server.  Seems pretty straight forward but I'm not seeing any progress.

Here's what I've configured on the NEXUS:

radius-server host 10.11.54.2 key 7 "<redacted>" authentication accounting

aaa authentication login default group radius local

aaa accounting default group radius

ip radius source-interface Vlan3

I'm not even getting log errors on the 10.11.54.2 server.  I can ping that server from the nexus.

Any thoughts?

Thanks!

Bob

1 REPLY
VIP Super Bronze

NEXUS 5596 Radius

Hi,

Can you try adding "aaa group server radius RadServer"

server 10.11.54.2

and test again:

link:

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/sec_radius.html#wp1298667

HTH

139
Views
0
Helpful
1
Replies
CreatePlease to create content