Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Nexus 5596 x 2248 and 2232 problem

I have some problem to finish my FEX configuration because all modules are in SDP timed state.  What can I do to solve it ?

Eth2/2        --                 SDP timed 1         full    10G     10Gbase-SR

Eth2/5        --                 SDP timed 1         full    10G     10Gbase-SR

Eth2/6        --                 SDP timed 1         full    10G     10Gbase-SR

My confiuguration  is

fex 108

  pinning max-links 1

  description "FEX_2232"

  type N2232P

fex 111

  pinning max-links 1

  description "FEX0111"

  type N2248T

fex 112

  pinning max-links 1

  description "FEX0112"

  type N2248T

!

interface port-channel108

  switchport mode fex-fabric

  fex associate 108

interface port-channel111

  switchport mode fex-fabric

  fex associate 111

interface port-channel112

  switchport mode fex-fabric

  fex associate 112

!

interface Ethernet2/2

  switchport mode fex-fabric

  fex associate 108

  channel-group 108

interface Ethernet2/5

  switchport mode fex-fabric

  fex associate 111

  channel-group 111

interface Ethernet2/6

  switchport mode fex-fabric

  fex associate 112

  channel-group 112

Everyone's tags (6)
487
Views
0
Helpful
0
Replies
CreatePlease to create content