I am running into a design issue with one of my customer where i have to connect the 5ks (with L3 module) to a pair of Juniper SRX firewalls. (2x 5ks <--> 2 x SRXs) We will be segmenting traffic based on the Juniper Fw zones and control the flow from there.
Now i know that layer-3 peering over vpc is not supported. (By giving ips to the port-channels).. Also If I just use routed links b/w them the Layer-3 peering would be fine and each 5k will see ECMP costs northwards to the 2 SRXs. BUT the pain is: How do i make one vlan talk to the other vlan over the SRX. Example: Any communication b/w vlan 10 and vlan 20 (having their SVIs on 5ks) should go through the SRXs.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.